The Pandemic Fueled the Growth of the Philippines Startups

The increasing number of startups demonstrates that the growth potential in the Philippines is huge, although it is still in its early stages.

FREMONT, CA: The pandemic played a vital role in advancing the Philippines' nascent startup system with growth it had never witnessed before. Many examples are seen in the country with rising investments and revenue generation.

The Philippines has traditionally lived in the shadow of its neighbours. In early 2019, startups from the country acquired only one per cent of all the venture capital (VC) invested in Southeast Asian startups and accounted for just four per cent of deal volumes. However, the first half of 2021 observed a significant shift, and the Philippines was responsible for nine per cent of VC dollars and four per cent of all deals. In the last few years, the Philippines, which previously has been a laggard in attracting investment, has drastically changed.

Stay ahead of the industry with exclusive feature stories on the top companies, expert insights and the latest news delivered straight to your inbox. Subscribe today.

One of the reasons for this transformation is the population's dramatic shifts in mobile internet access and smartphone ownership fueling growth for wallet mobile applications, making the ground fertile for e-commerce services. Services that suit lockdown increased users' activity and doubled their reach during the pandemic. Investors were forced out of their comfort zones to make deals remotely. This benefitted Southeast Asia, and the incredible stock rally gave cause to view the region with the Philippines progressing further than its neighbours.

This is seen as a snowball effect that slowly rolls down the hill with small investors and companies and starts to collect more until it becomes momentum and continues to roll down. However, there is much more work left for the country to do. Most Southeast Asia is still grappling with a talent shortage, especially talent and investment flow with a greater intensity only when the country can show that tangible startups exist with regularity.

Before the pandemic, a company made an acquisition of an organisation for 70 million USD, representing the first time a major player bought a Philippine tech business. This helped people gain a view of more opportunities. Moreover, local and foreign investors started to see great potential, which was a real catalyst for startup founders.

Many overseas investors began acquisitions and recognised the Philippines’ potential to become a vibrant startup market in Southeast Asia. Although it was hard initially to get people interested in the Philippines as a market, a few mergers created interest in the region with the emergence of remote work. Covid became an equaliser as people overcame their hesitancy to invest in teams they could not meet in person. This opened new opportunities and acquisitions that would not have been possible otherwise.

App-based work has revamped how investors tackle their jobs and changed hiring practices with unique benefits. It helped to hire people with different experiences and rebuild product teams. As many large organisations struggled to adapt to working from home or remotely, the pandemic soared corporate workers’ interest in startups. However, despite several renowned personalities becoming startup founders, there has not been a complete change. This gap can be addressed by attracting employees in the corporate landscape or at traditional companies.

More in News

Organizations across APAC are exploring more immersive digital environments as virtual reality applications expand beyond entertainment into education, healthcare, manufacturing, engineering, and workforce training. Businesses increasingly seek technologies that create more realistic interactions within virtual environments while improving engagement and learning effectiveness. How Are Haptic Technologies Enhancing Virtual Experiences? Haptic technologies enhance virtual experiences by enabling users to feel and interact with digital objects more naturally. Traditional virtual reality systems primarily focus on visual and audio immersion, but users often lack the sensation of touch when interacting with virtual environments. Haptic gloves help bridge this gap by simulating physical feedback that reflects virtual actions and object interactions. Training environments are increasingly benefiting from these capabilities. Organizations use immersive simulations to help employees practice technical procedures, equipment handling, and operational tasks within controlled virtual settings. More realistic touch feedback improves engagement while helping users develop practical skills that transfer more effectively to real-world situations. Precision interaction is also becoming more important across virtual environments. Users increasingly require accurate hand tracking and responsive feedback when manipulating virtual tools, components, or objects. Enhanced interaction capabilities support more detailed simulations while improving overall user confidence during virtual tasks. Educational applications continue expanding as well. Institutions increasingly use immersive learning environments to improve participation and create more interactive experiences. Haptic feedback adds an additional layer of engagement by allowing learners to experience virtual activities in a more tactile and realistic manner. Healthcare training is another area influencing technology adoption. Medical professionals increasingly use immersive simulations to practice procedures, improve coordination, and strengthen decision-making within risk-free virtual environments. Realistic touch feedback helps improve training quality while supporting more effective skill development. Why Is Industry Adoption Accelerating Across APAC? Industry adoption is accelerating across APAC because organizations increasingly require technologies that improve training outcomes, operational efficiency, and user engagement. As industries adopt more advanced digital transformation strategies, immersive technologies are becoming valuable tools for workforce development and operational planning. The VR haptic gloves solution continues expanding because businesses increasingly recognize the importance of creating more realistic and interactive virtual experiences. Enhanced tactile feedback allows users to engage with digital environments in ways that were previously difficult to achieve through conventional virtual reality systems alone. Technology integration is also improving system capabilities. Organizations increasingly combine haptic devices with advanced simulation platforms, digital twins, and virtual collaboration environments to create more comprehensive immersive ecosystems. Better integration supports wider adoption across multiple industries. Accessibility and scalability remain important priorities as well. Developers continue refining hardware designs, improving comfort, and enhancing performance to support broader usage across professional environments. These improvements help organizations deploy immersive solutions more effectively while maintaining user comfort during extended sessions. ...Read more
Spatial AI and Coexist robotic solutions are transforming the way humans and robots interact in shared environments. By combining advanced AI, computer vision, sensor fusion, real-time mapping, and autonomous decision-making capabilities, these systems enable robots to operate safely and efficiently alongside people. As organizations across manufacturing, logistics, healthcare, retail, and service industries pursue greater automation while maintaining workforce productivity, spatial AI and robotic solutions are becoming increasingly important across the APAC region. How Does Spatial AI Enable Safe and Intelligent Human-Robot Collaboration? Spatial AI enables robots to perceive, interpret, and navigate complex physical environments in real time. Through technologies such as 3D cameras, LiDAR, depth sensors, simultaneous localization and mapping (SLAM), and machine learning algorithms, robots create dynamic digital maps of their surroundings and continuously update them as conditions change. Environmental awareness enables Coexist robots to identify obstacles, detect human movement, anticipate interactions, and modify their behavior accordingly. Rather than relying solely on pre-programmed instructions, robots can make autonomous decisions based on real-time spatial data, improving operational flexibility and responsiveness. These capabilities are particularly valuable in APAC industries, where facilities often operate in fast-paced, highly dynamic environments. In manufacturing plants, robots can work safely alongside employees on assembly and production tasks without requiring extensive physical barriers. In warehouses and distribution centers, autonomous mobile robots navigate busy aisles efficiently, avoiding collisions with both people and equipment. Additionally, healthcare providers use intelligent robotic assistants to enhance logistics, patient services, and operational workflows. By fostering continuous environmental awareness, spatial AI lays the foundation for safe, productive, and collaborative interactions between humans and robots. What Business Benefits Do Spatial AI Coexist Robotic Solutions Deliver? Organizations adopting spatial AI robotics gain significant advantages in productivity, workplace safety, operational resilience, and scalability. Its systems automate repetitive, labor-intensive processes, allowing employees to focus on higher-value activities that require human judgment, creativity, and problem-solving skills. Real-time adaptability enables robots to function effectively in environments where workflows, layouts, and personnel movement frequently change. This flexibility reduces deployment complexity and minimizes disruptions associated with traditional automation systems. Additionally, spatial AI improves asset utilization through optimized navigation, workflow coordination, and task execution. Enhanced safety monitoring capabilities help organizations reduce workplace incidents by proactively identifying hazards and responding to changing conditions. Detailed operational data generated by robotic systems also supports continuous improvement initiatives and more informed business decisions. As labor challenges and automation demands continue to grow across APAC, spatial AI and coexisting robotic solutions provide a scalable pathway toward smarter, safer, and more efficient operations. ...Read more
Micro-LED semiconductor display technology is approaching a pivotal transition from controlled pilot environments to broader commercial deployment, yet its adoption path remains constrained by a narrow set of engineering and manufacturing realities. For executives evaluating display platforms, the challenge is not limited to performance metrics such as brightness or efficiency. The deeper concern lies in whether a solution can sustain consistency, manufacturability and cost discipline as volumes scale across applications like automotive interfaces, augmented reality systems and industrial displays. A recurring limitation across the market is fragmentation within the value chain. Many providers specialize in isolated segments such as chip design, transfer processes or module assembly, which introduces integration risks and slows development cycles. Systems that depend on external coordination often struggle to maintain alignment between driver architecture, transfer precision and packaging stability, resulting in variability across production batches. Decision-makers are therefore drawn toward solutions that demonstrate end-to-end control, where design, prototyping and manufacturing are tightly coordinated to ensure predictable outcomes. Another pressure point emerges in the transition from laboratory validation to consistent production yield. Micro-LED fabrication requires micron-level precision in mass transfer and bonding, yet even minor inconsistencies can cascade into large-scale defect rates. The ability to monitor production conditions in real time, diagnose anomalies at a structural level and iteratively refine processes determines whether yield improvements are incremental or systemic. Environments that combine strict contamination control, adaptive process optimization and equipment-level customization tend to show greater stability over time, particularly when production scales beyond pilot volumes. Scalability introduces another layer of complexity, especially when balancing efficiency with performance requirements. Uniform process strategies often fail to accommodate the differing demands of application environments. Automotive displays, for instance, demand stricter reliability thresholds and higher yield assurance, while AR applications prioritize efficiency and compact integration. Solutions that allow for flexible process selection based on use case requirements tend to manage this trade-off more effectively, avoiding the inefficiencies that arise from forcing a single manufacturing pathway across scenarios. "Commercial success in Micro-LED will depend on how effectively manufacturers combine precision engineering with cost efficiency to deliver reliable display solutions at scale." The progression of Micro-LED technology also depends on how effectively providers bridge innovation with industrial readiness. Patent depth, pilot production infrastructure and ecosystem collaboration play a defining role in accelerating commercialization. Providers that maintain dedicated pilot lines can validate processes, shorten iteration cycles and reduce the uncertainty associated with scaling. At the same time, alignment with upstream material suppliers and downstream application partners ensures that advancements are not confined to the lab but are translated into deployable systems. Within this context, Shenzhen Sitan Technology presents a model aligned with the emerging expectations. It maintains control across the technology chain, from CMOS driver integration to module manufacturing, enabling consistent alignment between design intent and production output. Its approach to mass transfer and yield optimization combines precision engineering with continuous process refinement, addressing one of the most persistent bottlenecks in Micro-LED adoption. Its use of scenario-based manufacturing strategies allows it to balance performance, efficiency and cost depending on application needs, rather than imposing a uniform process. Its pilot production capabilities and ecosystem partnerships further support a structured transition from development to scaled deployment, positioning it as a credible choice for organizations prioritizing dependable commercialization over isolated technical advancement. ...Read more
Micro LED semiconductor display technology is increasingly pivotal across multiple sectors, including consumer electronics, automotive systems, industrial visualization, healthcare devices, augmented reality platforms, and advanced digital communication environments. In the Asia-Pacific (APAC) region, the surge in investments directed toward semiconductor manufacturing and the advancement of electronics is significantly propelling the adoption of Micro LED display technologies in both enterprise and consumer markets. This growing demand for high-performance visual systems is fostering greater investment within the industry in Micro LED semiconductor display technologies, which are characterized by their scalability, operational reliability, and enhanced visual communication capabilities. Advanced Display Performance Supporting Modern Digital Applications Organizations across the consumer electronics, industrial manufacturing, healthcare, defense, retail, and transportation sectors are adopting advanced display technologies that improve visual clarity while enabling more intelligent, connected operational environments. Micro LED semiconductor display solutions are becoming increasingly valuable because they provide enhanced brightness, color accuracy, response speed, and viewing flexibility compared to many conventional display technologies. One major benefit of Micro LED technology is its ability to provide enhanced brightness and contrast performance while consuming less energy. Because each microscopic LED functions as an independent light source, Micro LED displays can achieve precise brightness control and deeper black levels without relying on traditional backlighting systems. This structure improves overall image quality while enabling greater visibility in both indoor and outdoor environments. Industries such as automotive manufacturing, aviation, digital signage, and healthcare increasingly require display systems capable of maintaining visual accuracy under varying environmental conditions, making Micro LED technology particularly relevant for high-demand operational applications across APAC and global technology markets. Display durability and operational lifespan also contribute to the growing importance of Micro LED semiconductor systems. Many industries operate in environments where displays are exposed to continuous usage, fluctuating temperatures, or demanding operational conditions. Micro LED displays are recognized for their longer operational life, resistance to image degradation, and lower risk of screen burn-in compared to certain traditional display formats. These characteristics support long-term infrastructure stability while reducing maintenance and replacement requirements across enterprise and industrial environments. "As industries move toward smarter infrastructure and immersive experiences, advanced display systems are becoming a critical foundation for real-time visualization and operational intelligence." The growing adoption of wearable technologies, augmented reality systems, and smart consumer electronics is further accelerating demand for compact, energy-efficient display solutions. Micro LED semiconductor displays support thinner form factors, lightweight device integration, and high-resolution visualization, aligning with evolving product design requirements. As digital devices become more portable and visually sophisticated, display technologies that balance performance, efficiency, and miniaturization are becoming increasingly significant across APAC consumer electronics and global technology sectors. Semiconductor Innovation Driving Manufacturing And Scalability The manufacturing process involves precisely integrating microscopic semiconductor components onto display substrates capable of supporting millions of individual light-emitting elements. This level of precision requires advanced fabrication techniques, material engineering capabilities, and highly controlled production environments that ensure consistent display performance and operational reliability. One of the major industry priorities is streamlining mass-transfer processes to accurately position microscopic LEDs on large-scale display surfaces with greater efficiency. Improvements in semiconductor fabrication technologies are helping manufacturers accelerate commercial adoption while reducing production complexity across various display formats and applications. Research and development efforts are also supporting innovation in display flexibility, transparency, and power optimization. Flexible Micro LED display systems are gaining attention within wearable electronics, foldable devices, automotive dashboards, and next-generation communication platforms where adaptable visual interfaces are increasingly important. The integration of Micro LED technology into automotive systems represents another growing area of industry development. Modern vehicles increasingly depend on digital dashboards, heads-up displays, infotainment systems, and intelligent driver-assistance interfaces that require high-performance visual environments. Micro LED semiconductor displays provide the brightness, responsiveness, and durability necessary for automotive applications where operational reliability and visibility remain critical. As connected vehicle technologies continue to advance, demand for intelligent display systems within transportation infrastructure is expected to increase significantly across APAC and other major automotive manufacturing regions. Industrial and commercial sectors are also adopting Micro LED display technology for command centers, operational monitoring systems, manufacturing visualization platforms, and large-scale digital signage environments. Businesses increasingly require display systems that operate continuously while maintaining image quality, scalability, and energy efficiency. Micro LED semiconductor solutions support these operational requirements by providing durable display infrastructure designed for long-term industrial and commercial performance. Future Industry Applications Expanding Across Digital Ecosystems The future of Micro LED semiconductor display technology is closely connected to broader advancements in artificial intelligence, smart infrastructure, immersive computing, and connected digital ecosystems. As industries increasingly focus on real-time visualization, intelligent automation, and interactive digital experiences, advanced display systems will become increasingly crucial for enhancing operational coordination and user engagement across diverse environments. Businesses and manufacturers are increasingly focusing on energy-efficient infrastructure solutions that support environmental responsibility while maintaining high operational performance. As semiconductor manufacturing capabilities continue improving, Micro LED technology is expected to become more commercially accessible across both enterprise and consumer markets. Continued investment in production scalability, material innovation, and integrated semiconductor design will likely accelerate adoption across smart devices, digital communication platforms, automotive systems, industrial environments, and immersive computing applications. ...Read more

Weekly Brief